To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash.<\/p>\n
Bare Flash<\/p>\n
<\/p>\n
Flash with diffusion dome <\/p>\n
There are also other products out there that are designed to diffuse the flash light, such as the Gary Fong accessories.<\/a><\/p>\n\n\n\n\n <\/p>\n <\/p>\nDiffusion Dome<\/p>\n<\/td>\n <\/p>\nGary Fong Lightsphere Cloud<\/a><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n <\/p>\nBut to have something that works as good but cost very much less. I have made myself a complete bounce flash kit using foam mats and an elastic band. There are many advantages of using foam mats to create the attachments. <\/p>\nLight \u2013 T<\/strong>he foam mat is light, it doesn\u2019t add additional weight to your camera bag<\/p>\nFlexible<\/strong> \u2013 The foam mat is flexible, so you can roll it up and store it anywhere in you camera bag unlike carrying a Gary Fong :). You can size it\/bend it the way you want. You also don’t need to worry about hitting it against walls<\/p>\nSnaps on easily<\/strong> \u2013 It is effortless to put on the attachments, simply slip it on and hold it in place using an elastic band<\/p>\nReplaceable<\/strong> \u2013 It is cheap to replace if you lose it on the road.<\/p>\nLarge diffusion area<\/strong> \u2013 You can design the size of the bounce card to suit. <\/p>\n <\/p>\nFull Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Diffusion Dome<\/p>\n<\/td>\n
Gary Fong Lightsphere Cloud<\/a><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n <\/p>\nBut to have something that works as good but cost very much less. I have made myself a complete bounce flash kit using foam mats and an elastic band. There are many advantages of using foam mats to create the attachments. <\/p>\nLight \u2013 T<\/strong>he foam mat is light, it doesn\u2019t add additional weight to your camera bag<\/p>\nFlexible<\/strong> \u2013 The foam mat is flexible, so you can roll it up and store it anywhere in you camera bag unlike carrying a Gary Fong :). You can size it\/bend it the way you want. You also don’t need to worry about hitting it against walls<\/p>\nSnaps on easily<\/strong> \u2013 It is effortless to put on the attachments, simply slip it on and hold it in place using an elastic band<\/p>\nReplaceable<\/strong> \u2013 It is cheap to replace if you lose it on the road.<\/p>\nLarge diffusion area<\/strong> \u2013 You can design the size of the bounce card to suit. <\/p>\n <\/p>\nFull Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
But to have something that works as good but cost very much less. I have made myself a complete bounce flash kit using foam mats and an elastic band. There are many advantages of using foam mats to create the attachments. <\/p>\n
Light \u2013 T<\/strong>he foam mat is light, it doesn\u2019t add additional weight to your camera bag<\/p>\nFlexible<\/strong> \u2013 The foam mat is flexible, so you can roll it up and store it anywhere in you camera bag unlike carrying a Gary Fong :). You can size it\/bend it the way you want. You also don’t need to worry about hitting it against walls<\/p>\nSnaps on easily<\/strong> \u2013 It is effortless to put on the attachments, simply slip it on and hold it in place using an elastic band<\/p>\nReplaceable<\/strong> \u2013 It is cheap to replace if you lose it on the road.<\/p>\nLarge diffusion area<\/strong> \u2013 You can design the size of the bounce card to suit. <\/p>\n <\/p>\nFull Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Flexible<\/strong> \u2013 The foam mat is flexible, so you can roll it up and store it anywhere in you camera bag unlike carrying a Gary Fong :). You can size it\/bend it the way you want. You also don’t need to worry about hitting it against walls<\/p>\nSnaps on easily<\/strong> \u2013 It is effortless to put on the attachments, simply slip it on and hold it in place using an elastic band<\/p>\nReplaceable<\/strong> \u2013 It is cheap to replace if you lose it on the road.<\/p>\nLarge diffusion area<\/strong> \u2013 You can design the size of the bounce card to suit. <\/p>\n <\/p>\nFull Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Snaps on easily<\/strong> \u2013 It is effortless to put on the attachments, simply slip it on and hold it in place using an elastic band<\/p>\nReplaceable<\/strong> \u2013 It is cheap to replace if you lose it on the road.<\/p>\nLarge diffusion area<\/strong> \u2013 You can design the size of the bounce card to suit. <\/p>\n <\/p>\nFull Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Replaceable<\/strong> \u2013 It is cheap to replace if you lose it on the road.<\/p>\nLarge diffusion area<\/strong> \u2013 You can design the size of the bounce card to suit. <\/p>\n <\/p>\nFull Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Large diffusion area<\/strong> \u2013 You can design the size of the bounce card to suit. <\/p>\n <\/p>\nFull Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Full Snoot<\/strong><\/p>\nI have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
I have created a full snoot using one single foam mat and hold in place using an elastic band. The snoot is used to create a directional light.<\/p>\n
<\/a><\/p>\nHalf Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Half Snoot<\/strong><\/p>\nHalf Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Half Snoot can also be created using one single foam mat. Simply fold it to the required size and hold it in place using an elastic band. The half snoot can be rotated each side very easily. Half snoot is used to minimise lens flare caused by the flash and minimise direct flash to the subject similar to how barn gate works. Half snoot is also useful to block the flash from flashing into the guests behind you.<\/p>\n
<\/a> <\/p>\nBounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
Bounce Card<\/strong><\/p>\nTo create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
To create a bounce card, you will need one single black foam mat and one single white foam mat. The flash is pointed upward to light up the white area of the bounce card which is effective soften and diffused. The diffused light is then bounced forward to light up your subject while also bouncing off the ceiling.<\/p>\n
<\/a> <\/p>\nThis is how they look when the flash is fired. <\/p>\nBounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\nThe half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
This is how they look when the flash is fired. <\/p>\n
Bounce card – The white area of the bounce card is lighted up to create a diffused light.<\/p>\n
The half snoot \u2013 Provide a directional light while preventing the light flashing towards the undesired side. <\/p>\n
<\/a><\/p>\nIf you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
If you want to purchase the complete DIY bounce flash kit ~ $15.50NZD free shipping, give me an email<\/a>. Accepting orders within New Zealand only.<\/p>\nThe kit includes:\n 3x Black foam mats (A4 size) <\/p>\n1x White foam mat (A4 size) <\/p>\n2x Elastic bands <\/p>\nAdhesive tapes <\/p>\nWhere can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
The kit includes:\n 3x Black foam mats (A4 size) <\/p>\n
1x White foam mat (A4 size) <\/p>\n
2x Elastic bands <\/p>\n
Adhesive tapes <\/p>\n
Where can I find the equipment seen on this site?<\/font><\/strong> <\/p>\nIf you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
If you find this site useful and planning to purchase any of the equipment seen on this site, please show your support by purchasing your photo equipment at B&H Photo Video<\/a>, or through any of the affiliate links seen on this site.<\/p>\n <\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
<\/p>\n\n\n\n\n\n\n\n\n<\/map><\/p>\n","protected":false},"excerpt":{"rendered":"To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
To achieve a soft diffused flash, often you will need to use a soft box or bounce your flash off walls and ceilings. You can also get a diffusion dome and attach onto the flash which is a bit better than using a bare flash. Bare Flash Flash with diffusion …<\/p>\n","protected":false},"author":1,"featured_media":4004,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[31,4],"tags":[144,152],"class_list":["post-1068","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flash-photography","category-gear-talk","tag-flash","tag-flash-modifier"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/comments?post=1068"}],"version-history":[{"count":6,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions"}],"predecessor-version":[{"id":3420,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/posts\/1068\/revisions\/3420"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media\/4004"}],"wp:attachment":[{"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/media?parent=1068"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/categories?post=1068"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.kentyuphotography.com\/blog\/wp-json\/wp\/v2\/tags?post=1068"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
![\"\"](\"http:\/\/www.bhphotovideo.com\/images\/affiliateimages\/6095-multibrand-w.gif\")
<\/p>\n![](\"https:\/\/lh3.googleusercontent.com\/-nxWFa98kk4U\/TDL91G7sOGI\/AAAAAAAAgEE\/capNkqZyClI\/s800\/zdiffuserdome_006.jpg\")
<\/p>\n![](\"https:\/\/lh4.googleusercontent.com\/-pN41tEn08Jc\/TDL91K7l8BI\/AAAAAAAAgEE\/W0MwcQMkMdw\/s800\/zdiffuserdome_007.jpg\")
<\/p>\n![](\"https:\/\/lh4.googleusercontent.com\/-kz3S8qkpQdc\/TDLy5-raiAI\/AAAAAAAAgEE\/8QeEN6_9KhI\/s800\/353_4949_SW-13H-Diffusion-Dome_front.jpg\")
<\/p>\n![](\"https:\/\/lh4.googleusercontent.com\/-NsAp8iVQ3f8\/TDLyzugv1tI\/AAAAAAAAgEE\/1pgaubkBY5w\/s800\/lsu_cloud_thumb2-2_2.jpg\")
<\/p>\n![\"DIY](\"http:\/\/farm5.static.flickr.com\/4119\/4766623075_d398f9aa3f_z.jpg\")
<\/a><\/p>\n![\"DIY](\"http:\/\/farm5.static.flickr.com\/4114\/4766623543_713cabddc1_z.jpg\")
<\/a> <\/p>\n![\"DIY](\"http:\/\/farm5.static.flickr.com\/4115\/4766622721_93201b5816_z.jpg\")
<\/a> <\/p>\n![\"DIY](\"http:\/\/farm5.static.flickr.com\/4081\/4763124399_ce8840825a_z.jpg\")
<\/a><\/p>\n